POWER
800W(Peak 1500W)
BATTERY CAPACITY
46.8VDC 14.5Ah
CHARGER
48V2A Gallium Nitride
CHARGING TIME
7~8h
MAXIMUM SPEED
30km/h (18.6mph)
RANGE
65km (40miles)
MAXIMUM CLIMBING
30% Slope
TIRE SIZE
10 inches
DAMPING
Rubber shock absorber
BRAKING
Front drum + Rear disc + Electronic Brake
LIGHT
Front light + Tail light + Rear turn signal

Minimalist Urban Aesthetics

ElitePrime has a sharp and smooth body, and has been greatly upgraded in terms of man-machine size.
The unique curved handle design can bring you a more comfortable experience.
The pedal size of 185*565mm makes your riding more stable and comfortable.

Polymer Shock Absorption

Front and rear suspension gives you the cushion & confidence to take on urban streets.
It uses polymer shock absorbers to reduce rattle and absorb impact better than springs. So it’s always smooth sailing, even as you jump from street to sidewalk.

40 Miles Long- range Battery

ElitePrime uses automotive grade 21700 power ternary lithium batteries, and the aluminum casing ensures high reliability.
One full charge on the ElitePrime can take you a full 40 miles (65km).

1500W Powerful Moter

Zip through the city, with a max speed of 18.6mph powered by an 800W motor.
And when you’re climbing hills, it pumps out a massive 1500W for short spurts to maintain your max speed.
That shatters the 500-700W max power of most e-scooters

Yadea Smart Connection

Connect your device to the Yadea to get overair-control and updates to your scooter.
· Cruise Control
· Energy Recovery
· Bluetooth Parking
· OTA Wireless Upgrade

Adventure for Future

FAQs

How to install the e-scooter?

1. Open the parking stand, expand the stand pipe and keep the scooter stable;
2. Connect the handle with both ends of the power cable inside the stand pipe, and put the cable into the stand pipe, then install the handle on the stand pipe;
3. Lock the screws with the installation tool (3mm) included in the package;
4. After the assembly, it is necessary to connect the charger and wait for 2-3 seconds for activation. The scooter will be turned on and ready for use after the battery is activated;
More details, please Check out the graphic and textual explanations on the manual.

How do I unfold the e-scooter?

Turn the buckle to disengage from the hook and lift the handle. Unfold the stand pipe to the maximum position, hold the pipe and press the folding handle down until the pipe is locked.

How do I fold the e-scooter?

1. Turn off the scooter before folding.Hold the stand pipe, push the safety button, open the folding handle, and fold the stand pipe;
2. Open the upper buckle, align to the hook at the rear, and hook the two.

How do I charge the battery?

1. Open the charging port cover at the bottom of the stem. Make sure the charging port is dry and free of dust;
2. Connect the charging adapter;
3. The battery is fully charged when the indicator light of the charging adapter turns from red to green;
4. Close the charging port cover after charging the battery.

How do I change the riding mode?

There are 4 modes for ElitePrime scooter.
When the scooter is on, single press the power button to shift between modes, and the scooter beeps upon successful operation.
1. Push mode,to provide power assistance when pushing, or for beginners riding: 6km/h, human icon;
2. Ride mode,medium speed mode for everyday riding: 15km/h, D icon;
3. Sport mode, recommended after mastering the riding skill, 30km/h, S icon;
4. Extreme speed mode,ultra fast, recommended after mastering the riding skills, 30km/h, X icon;

Product price:	AED5,509.00
Total options:
Order total: